1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Fork seal for Marzocchi M1R forks

 More than 5 in stock

30530502-z 30530502 GU30530502 30 53 05 02
 3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

Washer / shim, protects head bearing

2 required

 This part is available by special order, request a quote

AP8123641

Swingarm bearing oil seal

Dust seal for swingarm bearing

 More than 5 in stock

 90403040 GU90403040 90 40 30 40
 9040 3040 9040.3040 90.40.30.40

Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike

See SUA81068 for bearing oil seal

 2 in stock

AP8110066

Dust cover for steering head bearing

2 required on Cali EV and other models

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14517000 GU14517000 14 51 70 00
 1451 7000 1451.7000 14.51.70.00

Oil seal for bearing used in lower suspension linkage for rear shock absorber. 8 seals required per bike

 More than 5 in stock

AP8110068

Large washer used under stem nut

 2 in stock

 30516500 GU30516500 30 51 65 00
 3051 6500 3051.6500 30.51.65.00

Washer for crankshaft timing sprocket

Also used on steering stem on some models (e.g. T3)

 1 in stock

 95100837 GU95100837 95 10 08 37
 9510 0837 9510.0837 95.10.08.37